Reflex angle

347 Degree Angle

347π/180 ≈ 6.056293 radians · 347/360 (96.39%) of a circle

Diagram of a 347 degree angle347°
Reflex angle: 347°

Key facts

347°

Angle type
Reflex angle
Explement (adds to 360°)
13°
Radians
347π/180 ≈ 6.056293
Open 347° in the online protractor

A 347° angle is reflex because it measures between 180° and 360°. It is the "outside" of a 13° angle: together they make a full 360° circle.

347° is 347/360 of a full circle, or 347π/180 radians. If you face north and turn 347° clockwise, you end up facing between NNW and N (closest to north-northwest (NNW)).

347° angle facts

Angle type Reflex angle (between 180° and 360°)
Explement (adds to 360°) 13°
Radians 347π/180 ≈ 6.056293
Gradians 385.5556 grad
Fraction of a turn 347/360 (96.39%)
Degrees, minutes, seconds 347° 0′ 0″
Compass bearing between NNW and N (closest to north-northwest (NNW))

Trigonometric values of 347°

FunctionValue
sin 347° −0.224951
cos 347° 0.97437
tan 347° −0.230868

347° on a protractor

Protractor showing 347 degrees0102030405060708090100110120130140150160170180190200210220230240250260270280290300310320330340350347°
On a 360° protractor, read 347° directly going counter-clockwise from 0°. Try it in the interactive protractor →

How to draw a 347° angle with a protractor

  1. Subtract from 360°: 360° − 347° = 13°. A standard protractor only goes to 180°, so you draw the smaller angle first.
  2. Draw a straight line with a ruler and mark the vertex at one end.
  3. Place the protractor's center mark on the vertex, line up the 0° baseline with your line, and make a dot at 13°.
  4. Join the vertex to the dot. The inside angle is 13°; the outside angle, going the long way around, is 347°. Draw the angle arc on the outside and label it 347°.
  5. With a 360° protractor you can skip the subtraction: put 0° on your first line and mark 347° directly.

Drawing it a 347° angle without a protractor (rise and run method)

  1. Draw a straight baseline and measure exactly 10 inches along it from the vertex.
  2. At the 10-inch mark, draw a short line straight up at 90° (use a carpenter's square or the corner of a sheet of paper).
  3. Measure 2.31 inches (about 2 5/16″) up that line and make a mark.
  4. Join the mark to the vertex. The angle at the vertex is 13°, because tan 13° ≈ 0.2309.
  5. That gives you 13°. The outside (reflex) angle is 347°.

Where you see 347° angles

  • The Earth turns 347° on its axis in about 23 h 8 min.
  • A 347° reflex angle is what you measure when you go the "long way" around, like the outside corner of a building or a turn of more than half a circle.

347° angle FAQ

What type of angle is 347°?

A 347° angle is a reflex angle, because it is between 180° and 360°.

Does a 347° angle have a complement or supplement?

No. Complements add up to 90° and supplements to 180°, and 347° is already larger than both. What it does have is an explement (conjugate) of 13°, the angle that completes a full 360° circle.

How many radians is 347 degrees?

347° = 347π/180 radians ≈ 6.0563 rad. To convert degrees to radians, multiply by π/180: 347 × π/180 = 347π/180.

How do I measure a 347° angle on my screen?

Open the online protractor with 347° preset, or type 347 into its "Type an angle" box. You can then drag the arms onto your own lines to compare.